FRONT AXLE AIRBRAKE CHAMBERS

TM9-2320-270-20-2

SECONDARY AIR RESERVOIR - CONTINUED

NOTE

FOLLOW-ON MAINTENANCE: Check for leaks (page 4-1).

TASK ENDS HERE

FRONT AXLE AIRBRAKE CHAMBERS

This task covers:

c. Inspection/Replacement (page 4-689)

a. Removal/Disassembly (page 4-686)

d. Assembly/installation (page 4-689)

INITIAL SETUP

Materials/Parts

Tools

Cement, rubber (item 3, appendix C)

Chisel, cold hand, 1/2-inch

Rags, wiping (item 10, appendix C)

Hammer, machinist's ball-peen,

Sandpaper, medium grit (item 13, appendix C)

1-pound

Tape, teflon (item 22, appendix C)

Handle, ratchet, 3/8-inch drive

Screwdriver, flat-tip, 5/8-inch

Personnel Required

Socket, 3/8-inch, 3/8-inch drive,

12 point

Two

Vise

Wrench, box, 1/2-inch

Wrench, box, 9/16-inch

Wrench, box, 3/4-inch

Wrench, open-end, 7/8-inch

Wrench, pipe, 1/4- to 1-inch

ACTION

REMARKS

ITEM

LOCATION

REMOVAL/DISASSEMBLY

WARNING

Make sure all pressure is drained from air system before disconnecting air lines. Parts

under pressure can, when removed, fly off with great force causing injury to personnel.

4-686