REPAIR AT CONNECTION

TM9-2320-270-20-2

NYLON TUBING - CONTINUED

ACTION

ITEM

REMARKS

LOCATION

REPAIR AT CONNECTION

WARNING

Make sure all pressure is drained from air system before disconnecting air lines. Parts

under pressure can, when removed, fly off with great force causing injury to personnel.

NOTE

It is not necessary to remove nylon tubing to repair it. Steps are the same for repairing

all nylon tubing. However, wrench and repair part sizes will vary depending on tubing

size. Air line 012 from quick release valve to left front brake chamber hose is shown.

Nut (3)

a. Using 5/8-inch open-end wrench,

27. Nylon tube (1) to

adapter (2)

tighten.

b. Check for leaks (page 4-1).

If it still leaks, continue with step 28.

Air system

Drain (TM 9-2320-270-10).

28.

29.

Nut (3)

Using 5/8-inch open-end wrench, unscrew "

and pull back.

Pull out.

30. Adapter (2)

Nylon tube (1)

TA240418

4-639