|
|
TM 9-2320-270-20-2
INTERAXLE, TRANSFER CASE TO FRONT AXLE AND TANDEM AXLE PROPELLER
SHAFTS - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
NOTE
If removing transfer case to front axle propeller shaft, jack one wheel or front axle off
ground (TM 9-2320-270-10) to relieve windup.
If removing interaxle propeller shaft, jack one wheel on either tandem axle off ground
(TM 9-2320-270-10) to relieve windup.
If removing transfer case to tandem axle propeller shaft, jack one wheel on forward
tandem axle off ground (TM 9-2320-270-10) to relieve windup.
Arrow marks are stamped on sleeve yoke and splined shaft. If arrow marks cannot be
seen, use scriber to mark sleeve yoke and splined shaft.
Using hammer and punch, bend down four
Two lock plates (7)
2. Transfer case
tabs (11).
yoke (6)
Using 9/16-inch socket and handle,
Four screws (10)
3. Two bearing and
unscrew and take out.
and two lock
cap assemblies
plates (7)
(9) to transfer
case yoke (6)
Using jack and woodblock push out.
Two bearing and cap
4. Transfer case
It maybe necessary to use pliers.
assemblies (9)
yoke (6)
TA240387
4-591
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |