TOWING KIT STOPLIGHT SWITCH

TM 9-2320-270-20-1

TOWING KIT STOPLIGHT SWITCH

This task covers:

c. Installation (page 4-523)

a. Removal (page 4-522)

b. Cleaning/Inspection (page 4-523)

INITIAL SETUP

Personnel Required

Tools

One

Brush, wire

Wrench, open-end, 3/4-inch

Equipment Condition

Wrench, open-end, 11/32-inch

Wrench, open-end, 11/16-inch

Air system drained

(TM 9-2320-270-10).

Materials/Parts

Lockwasher, stoplight switch terminal

(two required)

Tape, teflon (item 22, appendix C)

ACTION

REMARKS

ITEM

LOCATION

REMOVAL

WARNING

Make sure all pressure is drained from air system before disconnecting switch. Parts

under pressure can, when removed, fly off with great force causing injury to personnel.

a. Using 11/32-inch wrench, unscrew and

Nut (3) and

1. Brown wire (1) to

take off.

lockwasher (4)

stoplight switch (2)

b. Get rid of lockwasher (4).

Take off.

Brown wire (1)

2. Stoplight switch (2)

s. Using 11/32-inch wrench, unscrew and

Nut (6) and lock-

3. Red wire (5) to

take off.

washer (7)

stoplight switch (2)

b. Get rid of lockwasher (7).

Take off.

Red wire (5)

4. Stoplight switch (2)

Using 11/16-inch and 3/4-inch wrenches,

Stoplight switch (2)

5. Adapter (8)

unscrew and take out.

4-522