INTERAXLE DIFFERENTIAL AND TRANSFER CASE WARNING LIGHT SWITCH

TM 9-2320-270-20-1

INTERAXLE DIFFERENTIAL AND TRANSFER CASE WARNING LIGHT SWITCH

This task covers:

c. Installation (page 4-406)

b. Cleaning/Inspection (page 4-405)

INITIAL SETUP

Personnel Required

Tools

One

Brush, wire

Screwdriver, flat-tip, 1/4-inch

Equipment Condition

Wrench, open-end, 5/8-inch

Wrench, open-end, 1 1/16-inch

Air pressure drained (TM 9-2320-270-10).

Materials/Parts

Lockwasher (two required)

Tape, teflon (item 22, appendix C)

ACTION

REMARKS

ITEM

LOCATION

REMOVAL

WARNING

Make sure all pressure is drained from air system before taking off switch. Parts under

pressure can, when removed, fly off with great force causing injury to personnel.

Using 5/8-inch wrench, unscrew and take

Air line 706(2)

1. Elbow (1)

off.

Using 5/8-inch wrench, unscrew and take

Air line 750 (4)

2. Elbow (3)

off.

Two screws (6),

a. Using screwdriver, unscrew and

3. Switch (5)

take off.

Iockwashers (7),

b. Get rid of Iockwashers (7).

and wires 423 (8)

Using 1 1/16-inch wrench, unscrew and

Switch (5)

4. Tee (9)

take out.

4-404