FRONT BLACKOUT MARKER LIGHT ASSEMBLY

TM 9-2320-270-20-1

FRONT BLACKOUT MARKER LIGHT ASSEMBLY

This task covers:

c. Assembly (page 4-384)

a. Removal (page 4-382)

d. Installation (page 4-384)

b. Disassembly (page 4-383)

INITIAL SETUP

Materials/Parts

Tools

Gasket

Handle, ratchet, 3/8-inch drive

Lockwasher, blackout marker stud

Screwdriver, flat-tip, 3/16-inch

to fender

Screwdriver, flat-tip, 1/4-inch

Lockwasher, blackout marker screw

Socket, 1/2-inch, deep well,

to fender

3/8-inch drive

Personnel Required

One

ACTION

REMARKS

ITEM

LOCATION

NOTE

To change lamp go to disassembly. it is not necessary to remove light assembly to

change lamp.

REMOVAL

NOTE

Steps in this task apply to either left or right blackout marker light. Left blackout marker

light is shown.

Unplug.

Connector (2)

1. Blackout marker

light (1)

a. Using socket and handle, unscrew and

Nut (3) and

take off.

lockwasher (4)

b. Get rid of Iockwasher (4).

a. Using 1/4-inch screwdriver, unscrew

Screw (6) and

3. Blackout marker

and take out.

Iockwasher (7)

light (1) to

b. Get rid of lockwasher (7).

fender (5)

Take off.

Blackout marker

4. Fender(5)

light (1)

4-302