CLEARANCE LIGHTS

TM9-2320-270-20-1

CLEARANCE LIGHTS

This task covers:

a. Removal (page 4-342)

b. Installation (page 4-344)

INITIAL SETUP

Materials/Parts

Tools

Crimp connector, clearance light lead

Crimping tool

Gasket

Pliers, diagonal-cutting

Gasket, lens

Screwdriver, cross-tip, number three

Gasket cement, silicone (item 2, appendix C)

Screwdriver, cross-tip, number two

Tag, marking (item 18, appendix C)

Wire stripper

Wrench, box, 7/16-inch

Personnel Required

One

ACTION

REMARKS

ITEM

LOCATION

REMOVAL

NOTE

Steps in this task are the same for all five clearance lights. Far left clearance light is

shown.

To change clearance light lamp do steps 7 thru 9 and 23 thru 25. It is not necessary to

remove work light to change lamp.

Tag hoses according to general maintenance instructions (page 4-1).

Using number three cross-tip screwdriver,

Four screws (3)

1. Two sunvisor

unscrew and take off.

and two sunvisor

assemblies (1) to

assemblies (1)

front inner roof

panel (2)

Using wrench, unscrew and take off.

Two nuts (6)

2. Two windshield wiper

handles (4) to wiper

motors (5)

Take off.

Two handles (4)

3. Wiper motors (5)

4-342