|
|
T M 9-2320-270-20-1
CIRCUIT BREAKERS - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
1. T e r m inal (1)
Screw (2), lock-
a.
Using flat-tip screwdriver, unscrew and
washer (3), and
take off.
wire (4)
b.
Get rid of Iockwasher (3).
2. T e r m inal (5)
Screw (6), lock-
a.
Using flat-tip screwdriver, unscrew and
washer (7), and
take off.
b.
wire (8)
Get rid of Iockwasher (7).
3. Circuit breaker (9)
Two screws (11),
a.
Using cross-tip screwdriver and 3/8-
to instrument
Iockwashers (12),
inch wrench, unscrew and take out.
panel (10)
nuts (13), and
b.
Get rid of Iockwashers (12).
circuit breaker (9)
INSTALLATION
4. Instrument
Circuit breaker (9)
Put in.
panel (10)
5. Circuit breaker (9)
Two screws (11), new
Screw together and tighten using cross-
Iockwashers (12),
tip screwdriver and 3/8-inch wrench.
and nuts (13)
6. Screw (6)
New Iockwasher (7)
Put on.
and yellow wire 9 (8)
7. Terminal (5)
Screw (6)
Screw in and tighten using flat-tip
screwdriver.
8. Screw (2)
New Iockwasher (3),
Put on.
and black wire 174 (4)
9. Terminal (1)
Screw (2)
Screw in and tighten using flat-tip screw-
driver.
TA240002
4-305
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |