|
|
TM 9-2320-270-20-1
HIGH BEAM INDICATOR LAMP
This task covers:
a. Removal (page 4-276)
b. Installation (page 4-276)
INITIAL SETUP
Personnel Required
Tools
One
Screwdriver, flat-tip, 3/8-inch
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
Using screwdriver, turn one-half turn
Three Iockscrews (2)
1. Instrument panel (1)
counterclockwise.
Open.
Instrument panel (1)
2.
Pull out.
Lamp holder (4)
3. High beam indicating
lamp assembly (3)
Push on and turn one-quarter turn
Lamp (5)
4. Lamp holder (4)
counterclockwise and take out.
INSTALLATION
Put in and turn one-quarter turn
Lamp (5)
5. Lamp holder (4)
clockwise.
Push in.
Lamp holder (4)
6. High beam indicating
lamp assembly (3)
Close.
Instrument panel (1)
7.
Using screwdriver, turn one-half turn
Three Iockscrews (2)
8. Instrument panel (1)
clockwise.
4-276
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |