 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-270-20-1
FAN BELTS
This task covers:
c. Installation (page 4-201)
a. Removal (page 4-200)
d. Adjustment (page 4-202)
b. Inspection (page 4-200)
INITIAL SETUP
Personnel Required
Tools
One
Handle, ratchet, 1/2-inch drive
Machinist's rule
Equipment Condition
Socket, 3/4-inch, 1/2-inch drive
Wrench, open-end, 3/4-inch
Fan removed (page 4-198).
Materials/Parts
Straight edge
ACTION
ITEM
REMARKS
LOCATION
REMOVAL
Using 3/4-inch wrench, unscrew part way.
Four screws (3)
1. Clutch drive (1)
to bracket (2)
Using 3/4-inch socket and handle, unscrew
Adjusting screw (4)
2.
until two belts (5) can be taken off clutch
drive (1) and pulley (6).
Take off.
Three belts (5)
3. Clutch drive (1)
and pulley (6)
INSPECTION
NOTE
If any belt is worn or damaged, replace all belts.
Inspect as shown in the general
Belts (5)
4.
maintenance instructions (page 4-1).
4-200
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals