|
|
TM 9-2320-270-20-1
THERMOSTAT HOUSINGS
This task covers:
f. Left Side Thermostat Housing Assembly
a. Right Side Thermostat Housing
Removal (page 4-183)
g. Left Side Thermostat Housing Installation
b. Right Side Thermostat Housing
Disassembly (page 4-187)
h. Right Side Thermostat Housing Assembly
c. Left Side Thermostat Housing Removal
i. Right Side Thermostat Housing Installation
d. Left Side Thermostat Housing Disas-
sembly (page 4-190)
e. Cleaning and Inspection (page 4-191)
INITIAL SETUP
Materials/Parts
Tools
Container
Bar, pry
Gasket, thermostat housing cover
Extension, 5-inch, 3/8-inch drive
(left only)
Hammer, rubber
Gasket, thermostat housing cover
Handle, ratchet, 3/8-inch drive
(right only)
Handle, ratchet, 1/2-inch drive
Gasket, thermostat housing to cylinder
Installer, packing
(left only)
Key, socket-head screw, 3/16-inch
Gasket, thermostat housing to cylinder
Knife, putty
(right only)
Screwdriver, flat-tip, 1/4-inch,
Lockwasher (seven required, left only)
Socket, 7/16-inch, 3/8-inch drive
Lockwasher (ten required, right only)
Socket, 9/16-inch, 3/8-inch drive
Packing (one right, one left)
Socket, 5/8-inch, 3/8-inch drive
Wrench, open-end, 1 1/32-inch
Personnel Required
(left only)
Wrench, open-end, 3/8-inch
One
(left only)
Wrench, open-end, 7/16-inch
Equipment Condition
(right only)
Wrench, open-end, 9/16-inch
Engine shutdown solenoid removed
Wrench, open-end, 1 1/16-inch
(right only)
housing only).
Wrench, open-end, 3/4-inch
Fuel filter to engine lines and fittings
(right only)
removed (page 4-42).
Wrench, open-end, 7/8-inch
Right or left side hood open and right or left
Wrench, open-end, 1-inch (left only)
side panel removed (TM 9-2320-270-10).
Wrench, open-end, 1 l/8-inch
Right or left side radiator guard removed
Wrench, open-end, 1 3/8-inch
(left only)
4-182
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |