|
|
TM 9-232-0-270-20-1
MUFFLER
This task covers:
c. Installation (page 4-139)
a. Removal (page 4-136)
b. Cleaning and Inspection (page 4-139)
INITIAL SETUP
Materials/Parts
Tools
Hammer, ball-peen, 1-pound
Lockwasher,
bracket to muffler
Lockwasher,
cab to muffler (nine required)
Handle, ratchet, 3/8-inch drive
Lockwasher,
handle to muffler (two required)
Socket, deep-well, 1/2-inch,
Lockwasher,
mount to cab (18 required)
3/8-inch drive
Socket, deep-well, 9/16-inch,
Personnel Required
3/8-inch drive
Socket, 3/4-inch, 3/8-inch drive
One
Wrench, open-end, 1/2-inch
ACTION
ITEM
REMARKS
LOCATION
REMOVAL
Two screws (4) and
a. Using 1/2-inch socket and handle,
1. Right side of cab
Iockwashers (5)
unscrew and take out.
(1)/handle (2) to
muffler (3)
b Get rid of Iockwashers (5).
Handle (2)
Take off.
2. Muffler(3)
Screw (7), lock-
s. Using 3/4-inch socket, and handle,
3. Bracket (6) to
washer (8), and
unscrew and take out.
muffler (3)
flat washer (9)
b. Get rid of Iockwasher (8).
TA239891
4-136
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |