 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-270-20-1
ENGINE THROTTLE CONTROL
This task covers:
c. Installation (page 4-129)
a. Removal (page 4-128)
b. Cleaning and Inspection (page 4-129))
INITIAL SETUP
Personnel Required
Tools
One
Handle, ratchet, 3/8-inch drive
Pliers, slip-joint
Equipment Condition
Socket, 7/16-inch, 3/8-inch drive
Wrench, open-end, 7/16-inch
Left side hood open (TM 9-2320-270-10).
Wrench, open-end, 9/16-inch
Wrench, open-end, 5/8-inch
Materials/Parts
Lockwasher (four required)
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
Using 9/16-inch wrench, unscrew and
Hose (2)
1. Elbow (1)
take off.
Two screws (5), flat
a. Using 7/16-inch socket, handle, and
2. Cylinder (3) to
7/16-inch wrench, unscrew and take
washers (6), lock-
plate (4)
out.
washers (7), and
b. Get rid of Iockwashers (7).
nuts (8)
Take off.
Cylinder (3)
3. Lever (9) and
plate (4)
Using 5/8-inch wrench, unscrew and take
Elbow (1)
4. Cylinder (3)
out.
Using slip-joint pliers, take off.
Spring (10)
5. Lever(9) and
plate (4)
Using 7/16-inch socket, handle, and
Two screws (11),
6. Lever (9)
7/16-inch wrench, unscrew and take out.
flat washers (12),
nuts (13)
Take off.
Lever (1)
7. Plate (4)
4-128
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals