|
|
TM9-2320-270-20-1
AIR CLEANER ASSEMBLY - CONTINUED
INSTALLATION CONTINUED
NOTE
FOLLOW-ON MAINTENANCE: Install left side panel and close left side of hood
(TM 9-2320-270-10).
TASK ENDS HERE
AIR CLEANER HOSES AND AIR RESTRICTION INDICATOR
This task covers:
c. Installation (page 4-65)
a. Removal (page 4-64)
b. Cleaning and Inspection (page 4-64)
INITIAL SETUP
Personnel Required
Tools
One
Screwdriver, flat-tip, 1/4-inch
Wrench, open-end, 7/16-inch
Equipment Condition
Left side of hood open (TM 9-2320-270-10).
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
Using wrench, unscrew and take out.
Air restriction
1. Air cleaner pipe (1)
indicator (2)
Using screwdriver, unscrew part way.
Four clamp
2. Four clamps (3)
screws (4)
a. Take off.
Air cleaner pipe
3. Air cleaner assembly
b. Take apart.
(l), two hoses
(5) and air inlet
(7), and four
housing (6)
clamps (3)
CLEANING AND INSPECTION
Clean and inspect as shown in the general
All parts
4.
maintenance instructions (page 4-1).
4-64
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |