|
|
TM9-2320-270-20-1
FUEL PUMP TO FUEL FILTER LINE AND FITTINGS
This task covers:
c. Installation (page 4-41)
a. Removal (page 4-40)
b. Cleaning and Inspection (page 4-41)
INITIAL SETUP
Personnel Required
Tools
One
Pan, drain
Wrench, open-end, 1/2-inch
Equipment Condtion
Wrench, open-end, 5/8-inch
Wrench, open-end, 3/4-inch
Right side of hood open and right side panel
removed (TM 9-2320-270-10).
Right radiator guard removed (page 4-151).
ACTION
REMARKS
ITEM
LOCATION
WARNING
No open flames, welding, grinding, smoking, or use of heat producing devices
permitted nearby when using fuel. Fuel burns easily and fumes are explosive. Keep
battery disconnected. Failure to observe these precautions could cause serious injury.
REMOVAL
a. Put drain pan underneath.
Fitting (3)
1. Engine (1)
b. Using 1/2-inch and 5/8-inch wrenches,
fuel pump outlet
unscrew and take out.
elbow (2)
c. Put end of fitting (3) in container and
let fuel drain out.
d. Get rid of fluid (page 4-1).
Using 1/2-inch and 3/4-inch wrenches,
Fitting (3)
2. Hose (4)
unscrew and take out.
Using 1/2-inch and 3/4-inch wrenches,
Hose (4)
3. Fuel filter inlet
unscrew and take out.
elbow (5)
Using 5/8-inch and 3/4-inch wrenches,
Fuel filter inlet
4. Reducer (6)
unscrew and take out.
elbow (5)
Using 3/4-inch wrench, unscrew and take
Reducer (6)
5. Fuel filter (7)
out.
4-40
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |