|
|
TM9-2320-270-20-1
OIL LEVEL GAGE
This task covers:
c. Installation (page 4-30)
a. Removal (page 4-30)
b. Cleaning and Inspection (page 4-30)
INITIAL SETUP
Equipment Condition
Tools
Right side of hood open and right side panel
Wrench, open-end, 3/4-inch
removed (TM 9-2320-270-10).
Wrench, open-end, 7/8-inch
Personnel Required
One
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
Pull out.
Dipstick (3)
1. Right side of engine
(1) and adapter (2)
Using 3/4-inch wrench, unscrew and take
Guide (4)
2. Adapter (2)
out.
Using 7/8-inch wrench, unscrew and take
Adapter (2) and
3. Engine (1)
out.
line (5)
CLEANING AND INSPECTION
Clean and inspect as shown in the generaI
All parts
4.
maintenance instructions (page 4-1).
INSTALLATION
Screw in and tighten using 7/8-inch
Line (5) and
5. Engine (1)
wrench.
adapter (2)
Screw in and tighten using 3/4-inch
Guide (4)
6. Adapter (2)
wrench.
Put in.
Dipstick (3)
7. Guide (4)
4-30
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |