|
|
TM 9-2320-270-20-1
TROUBLESHOOTING - CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
57. NO OR LOW AIR PRESSURE CONTINUED.
Step 7.
Shut down engine (TM 9-2320-270-10). Disconnect air line (1) from outlet
on top of compressor (2). Start engine (TM 9-2320-270-10) and see if
compressor is working (air will pump out of compressor).
If compressor does not work, shut down engine (TM 9-2320-270-10)
and replace (page 4-842).
Step 8.
Install side panel and close right side of hood (TM 9-2320-270-10). Open in-
strument panel (page 4-244). Check air pressure gage (3) and low pressure
warning light/buzzer (4) (TM 9-2320-270-10).
a. If gage or warning light/buzzer does not work, replace or repair
b. If truck still has no or low pressure, close instrument panel (page
4-244) and notify direct support maintenance.
TA239719
3-132
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |