|
|
TM 9-2320-270-20-1
TROUBLESHOOTING - CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Close instrument panel (page 4-244). Open right side of hood (TM 9-2320-270-
Step 5.
10) and disconnect engine harness connector (4) and plug (5). Using multi-
meter set at 30 vdc, put red probe on pin H for wire no. 422 from gage to
connector, and black probe to good ground.
Put ignition switch in OFF position and notify direct support
maintenance.
TA239698
3-111
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |