|
|
TM 9-2320-270-20-1
TROUBLESHOOTING - CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
33. STOPLIGHT DOES NOT WORK WHEN TRACTOR BRAKES ARE APPLIED - CONTINUED.
Step 16.
Close instrument panel (page 4-244). Disconnect wire no. 003 (1) from end
connector (2). Using multimeter set at 30 vdc, put red probe on wire no. 003 (1)
and black probe to good ground. While assistant applies brakes, take read-
ing, and release brakes.
If meter shows no voltage, plug wires back in and notify direct support
maintenance.
Disconnect wire no. 004 (3) from end connector (4). Using multimeter set at 30
Step 17.
vdc, put red probe on wire no. 004 (3) and black probe to good ground. While
assistant applies brakes, take reading, and release brakes.
Plug in wire (3) and notify direct support maintenance.
TA239681
3-94
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |