|
|
TM 9-2320-270-20-1
TROUBLESHOOTING - CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
32. DOME LIGHT DOES NOT WORK - CONTINUED.
Step 4.
Put dome light switch in ON position and open instrument panel (page 4-244).
Using multimeter set at 30 vdc, put red probe on dome iight switch terminai (1)
and black probe on panei (2).
a. if meter reads no voltage, put dome light switch in OFF position,
close instrument panel (page 4-244) and notify direct support
maintenance.
b. If meter reads voltage, put dome light switch in OFF position and re
place dome light switch (page 4-294).
Step 5.
Put headlight switch (3) in ON position.
a. if headlights work, do steps 2 and 3 under WARNING LIGHT DOES
NOT WORK (page 3-73).
b. if headlights do not work, do step 6 thru 9 under BOTH HEADLIGHTS
DO NOT WORK (page 3-48).
TA239674
3-86
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |