|
|
TM 9-2320-270-20-1
TROUBLESHOOTING - CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
13. ENGINE WILL NOT SHUTDOWN.
Step 1.
Open left side of hood (TM 9-2320-270-10), and manually shut down engine by
moving engine shutoff lever (1) to OFF position.
If lever will not move, disconnect suction fuel line (2) at tank (3) on
right side of truck. Wait until engine shuts down and connect suction
fuel line (2). Close left side of hood (TM 9-2320-270-10).
Step 2.
Open right side of hood and remove right side panel (TM 9-2320-270-10). At
engine shutdown solenoid (4) using multimeter set at 30 vdc, put red probe on
terminal for wire no. 019 (5) and black probe to good ground. Have assistant
turn on shutdown switch (TM 9-2320-270-10).
If meter reads no voltage, turn shutdown switch in OFF position and go to
step 4.
TA239630
3-41
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |