|
|
TM9-2320-270-20-1
TROUBLESHOOTING - CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
6. ENGINE USES TOO MUCH OIL (MORE THAN 10 QUARTS PER 1,000 MILES) (7 LITERS PER
1200 KM).
Open hood and remove side panels (TM 9-2320-270-10). Inspect oil filter (1),
Step 1.
oil cooler (2), and oil breather tubes (3) for leaking or damage.
a. If any parts are loose, tighten. Install side panels and hood
(TM 9-2320-270-10).
b. If oil filter (1) is damaged, replace (page 4-24).
c. If oil cooler (2) or oil breather tubes (3) are damaged, install side
panels and hood (TM 9-2320-270-10) and notify direct support
maintenance.
Remove and clean oil breathers (4) and hoses (5) and inspect for damage
Step 2.
(page 4-12 or 4-18).
a. If any parts are damaged, replace (page 4-12 or 4-18).
b. If parts are not damaged, install (page 4-12 or 4-18).
Start engine (TM 9-2320-270-10) and observe exhaust smoke.
Step 3.
a. Shut down engine (TM 9-2320-270-10).
b. If exhaust smoke is blue, install side panels and hood (TM 9-2320-
270-10) and notify direct support maintenance.
3-27
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |