|
|
TM 9-2320-269-34-1
FORWARD-REAR AXLE DIFFERENTIAL - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ASSEMBLY - CONTINUED
NOTE
The final check of the differential assembly is checking the gear tooth contact by paint impression method. When the ring is turned, the
applied print is squeezed away by the contact of the teeth, leaving bare spots, the exact size, shape, and location of the contacts.
When making adjustment, check drive side of gear teeth. Coast side should be correct when drive side is correct. With all adjustments
properly made, the result is a quiet running ring gear and pinion gear because the load is evenly distributed over all teeth.
93.
Differential
Ring gear (2)
a.
Apply oiled red lead paint lightly
carrier (1)
to 12 gear teeth.
b.
Turn gear (2) one complete turn.
Sharper impressions can be made by
applying some resistance to gear with a pry
bar and using an open-end wrench to turn
pinion gear.
2-869
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |