|
|
TM 9-2320-269-34-1
TANDEM AXLE ASSEMBLY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
NOTE
Steps 5 thru 8 disconnect wheel sensor wiring from rear-rear axle housing. Do the same steps for forward-
rear axle housing.
5.
Three studs (1)
Three nuts (3) and a.
Using 7/16-inch open-end
wrench,
and clips (2)
lockwashers (4)
unscrew and take off.
b.
Get rid of lockwashers (4).
6.
Three studs (1)
Three clips (2) Take off.
with wheel sensor
wires (5)
7.
Four wheel sensor
Four
Pull apart.
wires (5) and (6)
connectors (7)
8.
Axle housing (8)
Two wheel sensor
Move away from.
wires (5)
9.
Elbow (9)
Hose assembly (10) a.
Using 718-inch and 1-inch
open-end
wrenches, unscrew and take out.
b.
Move out of the way.
10.
Coupling (11)
Hose assembly (12) a.
Using 718-inch and 1-inch
open-end
wrenches, unscrew and take off.
b.
Move out of the way.
c.
Do step 10a and 10b for right side.
TA238508
2-836
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |