|
|
TM 9.2320-269-34-1
ETHER STARTING AID - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
44.
Fuel valve (1)
Two screws (2)
Put in.
45.
Upper mounting
Fuel valve (1)
Put on.
bracket (3)
46.
Two screws (2)
Two new lockwashers
Screw on, and tighten nuts (5) using two
(4) and nuts (5)
7/16-inch open-end wrenches.
47.
Intake manifold (6)
Upper mounting
Hold in place.
bracket (3)
48.
Upper mounting
Two new lockwashers
Screw in, and tighten using 9/16-inch
bracket (3)
(7) and screws (8)
deep well socket, ratchet handle with
3/8-inch drive, and 9/16-inch open-end
wrench.
49.
Fuel valve (1)
Coupling (9)
a. Wrap threads with teflon tape
b. Using 7/16-inch open-end wrench,
screw in and tighten.
50.
Coupling (9)
Tube (10)
Screw on, and tighten using 3/8-inch
and 7/16-inch open-end wrenches.
51.
Fuel valve (1)
Control cable (11)
Put in until edge of outer cable (12) is
even with valve (1).
52.
Screw (13)
Screw In, and tighten using 114-inch
flat-tip screwdriver.
2-382
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |