 |
|||
|
|
|||
|
Page Title:
ASSEMBLY/ADJUSTMENT - CONTINUED |
|
||
| ||||||||||
|
|
 TM 9-2320-269-34-1
GOVERNOR - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ASSEMBLY/ADJUSTMENT - CONTINUED
114. Governor housing (1)
Governor cover (2)
Put on, turning governor shaft (3) back and
forth.
115. Governor cover (2)
Six screws (4)
Using 1/4-inch flat-tip screwdriver, screw
in and tighten.
116.
Governor screw (5)
a. Coat with nonhardening sealing com-
pound.
b. Using 3/8-inch flat-tip screwdriver,
screw in and tighten.
117.
New gasket (6) and
Using 12-mm socket and ratchet handle
plug (7)
with 3/8-inch drive, screw in and
tighten.
118.
Nut (8) and
Screw in part way.
screw (9)
119.
Stop screw (10), bar
Using 1/8-inch flat-tip screwdriver,
screw (11), secur-
screw in part way.
ing bar (12), and
nut (13)
120. Governor cover (2)
New oil seal (14)
a. Coat with clean engine oil.
b. Put on.
121. Governor shaft (3)
Woodruff key (15)
Put In.
122. Control lever (16)
Put on.
123. Control lever (16)
Screw (17)
Using 10-mm open-end wrench, screw in
and tighten.
124. Governor lever (18)
Pin (19), plate
Put in.
(20), and
bracket (21)
125. Pin (19)
New cotter pin (22)
Using diagonal cutting pliers, put through
and bend over.
126. Governor shaft (3)
Lever (18)
Put lever (18) on.
2-358
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals