|
|
TM 9-2320-269-34-1
FUEL INJECTION PUMP - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ASSEMBLY - CONTINUED
140. Coupling plate (11)
Coupling (12)
a.
Mount plate (11) in vise with jaw caps.
b.
Set coupling (12) on plate (11) alining
mating marks.
141. Coupling (12)
Four screws (13),
a.
Screw in and tighten to - 25 ft-lb
new lockwashers
(24.4-33.9 N m) using 6-mm hex
(14) and
key socket and torque wrench with
washers (15)
3/8-inch drive.
b.
Remove coupling (12) from vise.
142. Camshaft (5)
Woodruff key (16)
Put in.
and coupling (12)
143.
New lockwasher (17)
Screw on and tighten nut (18) to
and nut (18)
60 - 70 ft-lb (81.3-97.6 N m) using
22-mm socket annd torque wrench with
3/8-inch drive.
TA238104
2-305
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |