|
|
TM 9-2320-269-34-1
FUEL INJECTORS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
33.
Injector (1) and
Pipe (8) and
a Take off dust cap.
adapter (7)
nuts (9) and (10)
b Screw on, and tighten using 1/2-inch
open-end wrench.
34
Injector (1) and
Pipe (12) and
a Take off dust cap.
retainer (11)
nuts (13) and (14)
b Screw on, and tighten using 11/16-
inch open-end wrench.
35
Two pipes
Clamp (16)
Put on.
(12) and (15)
NOTE
If lines are removed, go to FOLLOW-ON MAINTENANCE (page 2-253).
2-257
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |