|
|
TM 9-2320-269-34-1
FRONT CRANKCASE COVER - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance Instructions (page 2-46).
WARNING
Solvent burns easily. Solvent fumes can explode. Do not smoke or allow open flame nearby when using solvent.
Failure to observe these precautions could cause serious injury or death.
13.
All metal parts
a.
Clean in drycleaning solvent.
b.
Wipe dry with clean, dry rags.
INSPECTION/REPLACEMENT
NOTE
For more information on how to inspect parts, go to General Maintenance Instructions (page 2-46).
Replace damaged parts as needed.
14.
Front crankcase
a.
Look for scratches and nicks on seal
cover (1)
bore.
b.
Look for dents and distortion.
c.
Look for damaged threads.
ASSEMBLY
15. Front crankcase
Hook (2) and nut (3)
Screw in, and tighten using 11/16-inch
cover (1)
open-end wrench.
16. Elbow (4)
Screw in, and tighten using 1 1/8-inch
open-end wrench.
17. Pipe (5)
Screw in, and tighten using 14-inch pipe
wrench.
INSTALLATION
18. Cylinder block (6)
New gasket (7) and
With help from an assistant, put in posi-
front crankcase
tion on dowel pins.
cover (1)
2-200
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |