 |
|||
|
|
|||
|
Page Title:
RIGHT AND LEFT SIDE ENGINE MOUNTS |
|
||
| ||||||||||
|
|
 TM 9-2320-269-34-1
FRONT ENGINE MOUNTS - CONTINUED
INSTALLATION - CONTINUED
NOTE
FOLLOW-ON MAINTENANCE: Install engine and transmission cover (TM 9-2320-269-20-2).
TASK ENDS HERE
RIGHT AND LEFT SIDE ENGINE MOUNTS
This task covers:
a.
Removal (page 2-86)
c.
Inspection/Replacement (page 2-89)
b.
Cleaning (page 2-88)
d.
Installation (page 2-89)
INITIAL SETUP
Tools
Materials/Parts
Extension, 1/2-inch drive, 3-inch
Lockwashers, engine mounting frame
Handle, ratchet, 1/2-inch drive
bracket (four required)
Handle, ratchet, 3/4-inch drive
Rags, wiping (item 42, appendix B)
Jack, hydraulic hand
Solvent, drycleaning (item 49, appendix B)
Socket, 1/2-inch drive, 3/4-inch
Socket, 3/4-inch drive, 15116-inch
Personnel Required
Wrench, open-end, 3/4-inch
Wrench, open-end, 1 1/16-inch
Two
Materials/Parts
Equipment Condition
Lockwashers, engine mounting bracket
Engine and transmission cover removed
(four required)
(TM 9-2320-269-20-2).
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Rear engine
Two screws (2) and
a.
Support assembly with hydraulic jack.
mount (1)
lockwashers (3)
b.
Using 15116-inch socket and ratchet
handle with 3/4-inch drive, unscrew
but do not take out.
2
Front crankcase
Two screws (6) and
Using 3/4-inch socket, 3-inch extension ,
cover (4) and
nuts (7)
ratchet handle with 1/2-inch drive, and
frame (5)
3/4-inch open-end wrench, unscrew but do
not take out
2-86
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals