Packing and Marking

TM 9-1375-213-12-1

1-7. Packing and Marking

1-8. Data

a. The shipping container for the M180 kit (fig.

a. M180 and 270 Demolition Kits.

1-8) is a wirebound wooden box with a rope handle

Kit (disassembled and strapped for shipment)

Length ------------------------39.0 in. (975 mm)

at each end and two skids underneath to provide

Weight (approx)-------100 lb. (45 kg)

for movement for forklift. Six large loops of wire

Width -----------------------11.0 in. (275 mm)

along one edge of the box top and six small loops

Height ------------------16.0 in. (400 mm)

of wire along the mating edge are secured to-

Shaped Charge (without fiber base):

gether to form closures. The M270 is packed in a

Height ------------------12.0 in. (300 mm)

conventional wooden box (fig. 1-9) which is more

Major diameter ----------7.0 in. (175 mm)

Firing device:

suited to the continuous reuse required with a

Length ----------------------4.25 in. (106.25 mm)

training item.

Width --------------------1.25 in. 31.25 mm)

b. Within the composition-board-lined box, the

Height -----------------3.5 in. (87.5 mm)

collapsed kit is sealed in a barrier bag (fig. 1-10).

Warhead:

Length ----------------29.5 in. (737.5 mm)

The kit components are strapped or taped to-

Diameter ----------------6.5 in. (162.5 mm)

gether and polyethylene spacers are used to pre-

Rocket motor:

vent movement. The demolition circuit wooden

Length ------------------18.0 in. (450 mm)

subpack is located to the rear left side of the ship-

Diameter -----------------------6.5 in. (162.5 mm)

ping container. A wooden load spreader is placed

Demolition Circuit:

at each end of the strapped assembly for further

Length (overall) ------20 ft. (approx) (600 cm

approx)

protection. The whole kit is surrounded by bound

b. Explosives, M180 Demolition Kit.

fiber padding within the bag (fig. 1-11).

Weights of explosives (approx):

c. The wirebound wooden box for the Demolition

Shaped charge:

Kit, M180 bears markings in black as follows:

Comp B --------------- 11.0 lb. (4.95 kg)

------------ Demolition Kit Cratering:

Nomenclature

Comp A-3 ------------1.802. (50.4 gm)

M180

Warhead:

Weight -------------------- 165 lb (74.25 Kilograms)

H6 high explosive ---- 40.0 lb. (18.0 kg)

Cubical displacement ----- 7.2 cu ft (0.216M3)

Rocket motor

DODAC ------------------- 1375-M965

propellant grain MT

Department of

modified -----------------5.0 lb. (2.25 kg)

Transportation (DOT)

Booster:

marking -------------- Rocket Ammunition with

RDX ------------------------------1.0 oz. (28.0 gm)

Explosive projectile

Tetryl -------------------1.0 OZ . (1.0 gm)

NSN . . . . . . . . . . . . . . . . . . . . . . . 1375-00-141%7159

Demolition Circuit:

Storage Temperature

PETN ------------------1.0 oz. (28.0 gm)

Limits ---------------- -40F to +140F (-40C to

c. Packing M180 Demolition Kit.

+60C)

Kits per shipping

container --------- 1

d. An additional marking in black on top of

Outer dimensions of

wirebound wooden box is as follows:

container (approx) 45 x 13 x 20 in.

WARNING

(1137.5 x 331.25 X 512.5

mm)

CONTAINS EED, DO NOT SET UP IN

Weight of container

(w/contents)

AREA OF HIGH INTENSITY RF ENERGY

(approx) ---------- 1651b. (74.25 kg)

e. The wooden box for the Demolition Kit, M270

Cubical displacement

of container . . . . . . 7.2 cu ft (0.216 M3)

bears marking in black as follows:

d. Packing M270 Demolition Kit.

Nomenclature

----------------Demolition Kit Cratering,

Kits per shipping

Training M270

container --------- 1

Lot No. -------------------- u u u

Outer dimensions of

Cubical displacement -----8.0 cu ft (0.240 M3)

container (approx) 46 1/8 x 13 5/8 x 21 7/8 in.

Weight -------------------- 170 lb (77.0 kg)

(1153.1 X 340.6 x 546.8

NSN----------------------6920-0l-87.0038or

mm)

TRADOC Trainin~

Weight of container

Device DVC-T-5-42

(w/contents)

(approx) ---------- 170 lb. (77.0 kg)

Cubical displacement

of container -------8.0 cu ft (0.24 M3)

1-11

Change 3