CHAPTER 1 INTRODUCTION - TM-9-1240-322-34-P0051

TM 9-1240-322-34&P

CHAPTER 1

INTRODUCTION

Section 1. GENERAL

1-1.

SCOPE

This volume contains the maintenance requirements and procedures for direct support and general

support (DS/GS) maintenance for the 8635466 Infinity Sight. See Volume I for troubleshooting

procedures.

1-2.

ORGANIZATION

a. Chapter 2, General Maintenance Information, lists the maintenance items and references other

procedures that are necessary to do the maintenance in this manual.

b. Chapter 3, Inspection Upon Receipt, gives the kind of defects to look for when the Infinity Sight

is returned to DS/GS. A complete inspection should be made and faults listed on DA Form 2404 before

any repairs are made.

c. Chapter 4, Maintenance Procedures, give step-by-step procedures to repair faults found during

inspection or troubleshooting.

d. Chapter 5, Final Inspection, gives procedures to be done after repair to make sure that the

Infinity Sight works.

e. Chapter 6, Packaging, gives procedures for packaging the Infinity Sight for storage or shipment.

f. Appendix A, Expendable Supplies and Materials List, lists the supplies and materials needed to

repair the Infinity Sight.

g. Appendix B, Maintenance Task Index, helps you find the necessary maintenance tasks for the

Infinity Sight.

h. Appendix C, Repair Parts and Special Tools List, gives a listing of repair parts, special tools,

and support equipment required for the performance of direct support, general support, and depot

maintenance of the infinity sight.

Vol II

1-1