CHAPTER 3 INSPECTION UPON RECEIPT - TM-9-1220-231-34-P0025

TM 9-1220-231-34&P

INSPECTION UPON RECEIPT

3-1.

SCOPE

This chapter gives procedures to check the ballistics drive for faults you can see when received in DS/GS

shop. Maintenance procedures are referenced for repair of the assembly. A complete inspection should be

made and all faults listed on DA Form 2404 before taking any maintenance actions.

INSPECTION UPON RECEIPT

TOOLS: 5/16" modified socket head screw key (fabricated Allen wrench,

1/2", 9/16", 3/4'", 15/16" box end wrench

PERSONNEL: One

REFERENCES:

TM 43-0139 for painting

TM 9-254 for general maintenance

JPG 4lC for Completing DA Form 2404

Installing lead seals

EQUIPMENT CONDITION: Ballistics drive mounted in vehicle.

NOTE

Once the ballistic drive is removed from vehicle DS/GS

does not have the tools to accurately set the fire control

level if the level is tampered with. If the fire control level

needs to be repaired, repair before removing ballistic drive

from vehicle.

Vol II