Section 10. JUNCTION BOX ASSEMBLY

TM 9-1220-220-34

Section 10. JUNCTION BOX ASSEMBLY

4- 29.

JUNCTION BOX ASSEMBLY MAINTENANCE PROCEDURES INDEX

Task

Reference (para)

Removal

4-30

Disassemblv

4-31

Assembly

4-32

Installation

4-33

4-30.

JUNCTION BOX ASSEMBLY REMOVAL

APPLICABLE CONFIGURATIONS: M10, M10AI, M10A4, M10A5, and M10A6

TOOLS:

1/2" box end wrench

1/2" open end wrench

PERSONNEL:

One

EQUIPMENT CONDITION: Junction box assembly mounted in turret

PRELIMINARY PROCEDURES: Remove ballistics drive (para 4-4. frames 4 and 5)

FRAME 1

Step

Procedure

Using 1/2"box end wrench, remove two screws (I) and two lockwashers (2) holding

bracket (3) to turret wall.

Remove junction box (4).

Using 1/2' box end wrench and l/2"open end wrench, remove two nuts (5), two lock-

washers (6), and two screws (7) holding bracket (3) to junction box (4).

Remove bracket (3) from junction box (4).

END OF TASK

Para 4-29 Vol II

4-72