 |
|||
|
|
|||
|
Page Title:
BALLISTICS DRIVE INSPECTION UPON RECEIPT (CONT) |
|
||
| ||||||||||
|
|
 TM 9-1220-220-34
3-2.
BALLISTICS DRIVE INSPECTION UPON RECEIPT (CONT)
FRAME 3
Step
Procedure
Maintenance Action
Reference
1.
(M10, M10A1, M10A6 only)
Tighten or replace if missing.
...
Using 7/16 open end wrench,
check that eight screws (I)
are tight.
2.
Check surfaces of two mounting
Remove, nicks or burrs.
...
supports (2) for nicks or burrs.
3.
Using 9/16"open end wrench,
Tighten. Replace if missing.
...
check that eight screws (3)
are tight.
4.
Using " screwdriver,
Tighten. Replace if missing.
...
check that four screws (4)
are tight.
5.
Using 1/2"open end wrench,
Tighten. Replace if missing.
...
check that eight screws (7)
are tight.
6.
Using 5/16" square stock, 1"
Tighten plug.
...
long, with 3/8" socket and
extension and rachet, check that
two plugs (8) are tight.
GO TO FRAME 4
3-6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals