 |
|||
|
|
|||
|
Page Title:
BALLISTICS DRIVE INSPECTION UPON RECEIPT (CONT) |
|
||
| ||||||||||
|
|
 TM 9-1220-220-34
3-2.
BALLISTICS DRIVE INSPECTION UPON RECEIPT (CONT)
FRAME 2
Step
Procedure
Maintenance Action
Reference
NOTE
If the M10A3 unit is being
inspected, go to frame 3.
1.
Using 1/2"open end wrench, check
Tighten. Replace if missing.
...
that two screws (1) are tight.
2.
Check that junction box input
Adjust junction box.
shaft (2) turns freely when
frame 4, step 1,
universal joint (3) is
frame 5, step 1.
disconnected from shaft
assembly (4).
3.
(M10, M10A1, M10A6,
Tighten. Replace if missing.
...
only) Using 1/4 screw-
driver check that three
screws (5) are tight.
4.
Using 5/64" Allen wrench,
Tighten. Replace if missing
...
check that three setscrews (6)
are tight.
GO TO FRAME 3
3-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals