 |
|||
|
|
|||
|
Page Title:
BALLISTICS DRIVE INSPECTION UPON RECEIPT (CONT) |
|
||
| ||||||||||
|
|
 TM 9-1220-220-34
3-2.
BALLISTICS DRIVE INSPECTION UPON RECEIPT (CONT)
FRAME 1
Step
Procedure
Maintenance Action
Reference
1.
Check ballistics drive for
If cracks or dents are found,
bent, broken, or damaged
tell your supervisor.
parts.
2.
Check ballistics drive for
If parts are missing, tell your
missing parts.
supervisor.
3
Check ballistics drive for
Paint chipped or scratched
TM 43-0139
chipped or scratched paint.
areas.
4.
Check ballistics drive for dirt
Clean ballistics drive.
JPG 41C
and corrosion.
5.
Check for lateral movement of
If there is movement, send
cross shaft assembly (1) in the
ballistics drive to depot for
left and right support assemblies
repair.
(2).
6.
Check rubber boot (4) for
Replace boot.
cracking and breaking.
7.
Using 3/16" screwdriver,
Replace if missing.
check that eight screws (four
screws for M10A3) (5) are
tight.
8.
Check that five pins (three
Replace if missing.
Para 4-23 or
pins for M10A3) (6) are not
4-28
missing.
9.
Check two rubber covers
Replace universal joint if
(one rubber cover for
damaged.
M10A3) (7) on universal
joints (8) for cracking and
breaking.
GO TO FRAME 2
3-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals