|
|
TM 5-6675-250-34
Table 2-1. Troubleshooting - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TS 006276
(3). Loosen MODE SELECT, TEST SELECT and BIAS switch knob setscrews with 5/64 inch hex
(0.050-inch for TEST SELECT) hex wrench and remove knob from switch shaft.
(4). Unscrew BIAS control locking knob (fig. 2-38) from BIAS control shaft and remove.
2-30,
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |