RSE DOWNLOADING PROCEDURES FOR THE RADC STARGATE 5000 AND STARGATE 1000 PWA

TM 5-6350-275-24&P

3-131 Continued

Step 14. Duress Codes

The keypad supports the entry of a duress sequence, providing an alarm at the master without any indication to

the zone user.

See the zone supervisor for instructions on operating the duress sequence.

3-132. RSE DOWNLOADING PROCEDURES FOR THE RADC STARGATE 5000 AND STARGATE 1000 PWA

a. The following RSE downloading must be done each time an RADC Stargate 5000 or 1000 PWA is replaced.

b. The Europa remote is capable of supporting many hardware combinations. Each remote can be configured to

meet your requirements and re-configured to suit your changing needs. Configuration is done with the Remote

Software Environment (RSE) editor. With the RSE you can define a configuration, make changes to it, and

download it to the remote through a PC connected to the remote's diagnostic port.

With the RSE you can define hardware attached to the remote and the functionality of the remote. RSE defines six

functional groups:

General parameters

I/O bus

Slave remotes

Telemetry

Functions

Applications

The RSE can be used with any IBM PC compatible computer, and can be supplied in the following disk formats:

5.25" IBM 360KB

5.25" IBM 1.2MD

3.5" IBM 720KB, IBM 1.44MB

Step 1. Power on the laptop computer and place the RSE diskette in drive A.

Step 2. Connect the serial data cable to the laptop computer and the Remote Area Data Collector Stargate 5000 or

1000 diagnostic port.

Step 3. Type in A: and Enter. This enables the computer to read from or write to drive A.

Step 4. Type RSE and press the Enter key. A list of the current files is displayed, along with the following:

RSE Editor 3rd Gen Version 5.18 English Name of remote?>

Step 5. Select the file name of the remote to be downloaded and press Enter. The following menu appears:

3-245