REPLACE CCTV CAMERA AND ENVIRONMENTAL ENCLOSURE ASSEMBLY TC306E/EX

TM 5-6350-275-24&P

3-98. REPLACE CCTV CAMERA AND ENVIRONMENTAL ENCLOSURE ASSEMBLY TC306E/EX. (Figure 3-50).

This task consists of:

a. Remove

b. Install

INITIAL SETUP:

Tools:

General Safety Instructions:

Screwdriver, Flat tip (Item 7, App B)

Remove all jewelry while working on

Materials/Parts:

equipment.

CCTV Camera /w Lens in Pressurized

Environmental Enclosure

WARNING

Shut off power source before attempting to disconnect, service, or connect wires or cables.

Failure to do so may result in serious injury or death.

a. Removal

(1) Remove input cable from connector (2) and camera enclosure (1).

(2) Loosen clamp holders (3) using a flat tip screwdriver and remove camera and environmental enclosure from

mounting bracket (4).

b. Installation

(1) Insert camera and environmental enclosure in mounting bracket (4) and tighten down with two screws on clamp

holders.

(2) Connect input cable to connector (2) on camera enclosure (1).

Figure 3-50. Removal and Replacement of CCTV Camera and Environmental Enclosure Assembly (TC 306 E/EX)

3-190