REPLACE 12 VDC BATTERY - TM-5-6350-275-24-P0222

TM 5-6350-275-24&P

3-60. REPLACE 12 VDC BATTERY. (Figure 3-40).

This task consists of:

a. Remove

b. Install

INITIAL SETUP

Equipment Condition:

General Safety Instructions:

Enclosure cover removed

Remove all jewelry while working on equipment.

Materials/Parts:

12 VDC battery

Wear ESD wriststrap while

working on equipment.

WARNING

Shut off power source before attempting to disconnect, service, or connect wires

or cables. Failure to do so may result in serious injury or death.

a. Removal

(1) Remove red and black wires slip-on terminal lugs from positive and negative terminals (26) of 12 vdc

battery (25).

(2) Remove battery from enclosure.

b. Installation

(1) Place the 12 vdc battery (25) in enclosure.

(2) Connect red and black wires slip-on terminal lugs to positive and negative terminals (26) of 12 vdc battery

(25).

(3) Connect AC adapter to power source.

(4) Place front access cover on enclosure and secure.

3-142