REPLACE REMOTE STATUS MONITOR MASTER STATION.

TM 5-6350-275-24&P

3-33. REPLACE UPS BATTERY(IES).

Due to the specialized requirements for the equipment, refer to the SAIG to determine proper troubleshooting,

removal, and replacement procedures.

3-34. REPLACE REMOTE STATUS MONITOR MASTER STATION. (Figure 3-37).

This task consists of:

a. Remove

b. Install

INITIAL SETUP:

Tools:

General Safety Instructions:

Screwdriver, Flat tip (Item 6, App B)

Remove all jewelry while working on

Scow driver, Flat tip (Item 7, App B)

equipment.

Materials/Parts:

RSM Assembly.

WARNING

Shut off power source before attempting to disconnect, service, or connect wires or cables. Failure to do

so may result in serious injury or death.

a. Removal

(1)

Place power on/off switch (14) to off.

(2)

Unplug ac power cord from power source.

(3)

Tag and remove wires from rear panel on RSM (1).

b. Installation

(1)

Connect tagged wires to rear panel connectors on RSM (1).

(2)

Plug ac power cord into power source.

(3)

Place power on/off switch (14) to on.

NOTE

For replacement of RSM components see paragraphs 3-11, 3-12, 3-13, 3-14, 3-15, 3-16, 3-19, 3-20, 3-21,

3-22, and 3-26.

3-111