RSM CHARACTERISTICS

TM 5-6350-275-24&P

b. Remote Status Monitor (RSM). The RSM monitors and controls Remote Area Data Collectors. The RSM

communicates with the PMC through the 9600 baud modem link. The direct communication line from the RADCs also

allows the RSM to take over control of the RADCs through the automatic/manual switch to the RSM communication

ports, in the event of a PMC failure.

RSM CHARACTERISTICS

Status Display - Same As Primary Monitor Console (PMC)

Up To 8 Remote Status Monitors (RSMs) for Large Primary Monitor Console (LPMC) and Up To 2 Remote Status

Monitors (RSMs) for Small Primary Monitor Console (SPMC)

Switch-Over From Primary Monitor Console (PMC) to Remote Status Monitor (RSM) Manual Or Automatic Without

Data Loss

Identical Hardware and Software to Primary Monitor Console (PMC)

Uninterruptible Power Supply (6 Hour)

Two Modes of Operation

Monitor Only - Displays All Or Selected Portions Of The Data Displayed At Primary Monitor Console (PMC)

Charged Coupled Device (CCD) Mode - Performs All Of The Functions of the Primary Monitor Console (PMC) For

Selected Remote Area Data Collectors

Supports All Primary Monitor Console (PMC) Communications Media RSM CAPABILITIES AND FEATURES

RSM CAPABILITEIS AND FEATURES

Same as Primary Monitor Console above, except the RSM uses the Data Communication Systems to take control of

the RADCs in the event of a Central Processing Unit (CPU) failure.

c. Remote Area Data Collector (RADC). Collects and processes inputs and outputs from sensors and remote terminal

units. Up to 16 Intelligent Access Controllers (IACs) (31 Doors) can be multi-dropped on an RS-485 line (AUX 1) port,

and up to 31 satellite Leda can be multi-dropped on another RS-485 line (AUX 0) port. Lines can be extended 4000 feet

from the RADC location. A port is also provided for the connection of a lap top computer for unit configuration and

diagnostics. Standard Data communications from the RADC to the PMC is provided by the Mod 2, 1200 baud modem

and the Bell 3002 Data Communication circuit. The RADC can perform standalone access and exit control functions.

The RADC carries its own integral power source (12 vdc, 7 amp hr. battery) to maintain system integrity in the event of

loss of primary power.

RADC CHARACTERISTICS

Interior STARGATE 5000:

20 Sensors With Alarm, Tamper, And Self-Test; Expandable

4 Response Devices; Expandable

Distance to Sensors and Response Devices (RDs) 150 Meters

Up to 31 Doors Entry Control Equipment (ECE) (Entry and Exit)

Distance to Door Controllers 4000 Feet

10 Individually Selectable Microphones (Mics)

Intercom

Exterior STARGATE 1000:

32 Sensors With Alarm and Tamper; Expandable

16 Response Devices; Expandable

Distance To Sensors 1000 Meters

Joint-Services Interior Intrusion Detection System (J-SIIDS) Interface

Locally Configured Using A Laptop Personal Computer (PC)

Interfaces To All Primary Monitor Console (PMC) Communications Media

Data Encryption System (DES) Data Authentication System

Uninterruptible Power Supply (6 Hour); Powers Interior Sensors; 12 or 20 volts direct current (vdc)

1-10