CHAPTER 1 INTRODUCTION - TM-5-6350-275-24-P0009

TM 5-6350-275-24&P

CHAPTER 1

INTRODUCTION

Section I. GENERAL INFORMATION

1-1. SCOPE.

Type of Manual: Unit, Direct Support and General Support Maintenance Manual Including Repair Parts and

Special Tools List.

Equipment Name: Integrated Commercial Intrusion Detection System (ICIDS).

Purpose of Equipment: Detects unauthorized intrusions, and generates alarms upon unauthorized entry into

secured areas by use of various sensors.

1-2. MAINTENANCE FORMS, RECORDS, AND REPORTS. Department of the Army forms and procedures used for

equipment maintenance will be those prescribed by The Army Maintenance Management System, DA PAM 738-750.

1-3. CORROSION PREVENTION AND CONTROL (CPC). Corrosion Prevention and Control (CPC) of Army material is

a continuing concern. It is important that any corrosion problems with this equipment be reported so the problem can be

corrected and improvements can be made to prevent the problem in future items.

While corrosion is typically associated with rusting of metals, it can also include deterioration of other materials.

such as rubber and plastic. Unusual cracking, softening, swelling, or breaking of these materials may be

symptoms of a corrosion problem.

If a corrosion problem is identified, it can be reported using Standard Form 368, Product Quality Deficiency

Report. Use of key words such as "corrosion", "rust", "deterioration", or "cracking" will assure that the information

is, identified as a CPC problem.

This form should be submitted to: Commander, U.S. Army Aviation and Troop Command, ATTN: AMSAT-I-

MDO, 4300 Goodfellow Blvd., St. Louis, MO 63120-1798.

1-4. DESTRUCTION OF ARMY MATERIAL TO PREVENT ENEMY USE. For this unclassified document, destroy by

any method that will prevent disclosure of contents or reconstruction of the document. Refer to TM 750-244-3 for

instructions covering destruction of Army material to prevent enemy use.

1-5. PREPARATION FOR STORAGE OR SHIPMENT. Refer to Chapter 2, Section VII.

Preparation for storage or shipment.

1-6. QUALITY ASSURANCE. Quality Assurance (QA) has been performed on this manual in accordance with MIL-M-

85337A (NAVY) and MIL-M-63038C (TM).

1-1