Display a Portal Summary

TM 5-6350-275-10

(5) Enter the card number if known. Other methods of entering card numbers are as follows:

11* - All cards beginning with the entered number are listed.

* - All cards are listed.

(6) Enter the name of a access level or use the [*] to indicate all levels, then press [NEXT] or [GO].

(7) Enter the zone identifier or use the [*] to indicate all zones, then press [GO] to create the display.

(8) When you press [GO], the system creates a summary display based upon the information you have entered up

to that point. Any parameter you have omitted is set to [*1 indicating 'all'.

Display a Portal Summary.

(1) Select the F7 [SUMMRY] key from the main menu.

(2) Press the F9 [PORTAL] key and confirm your selection by pressing [NEXT].

(3) If you require a summary of all portals, regardless of their condition, press [NEXT] and go to step (4).

If you want to display only portals with particular attributes, select one or more of the following keys and press

[NEXT]:

[FAILED] [DISABL] [ALMIN] [CNTIN] [ACNTIN] [ALARM] [AND] [NOT]

(4) Enter the following data:

[Group] - enter the specific group identifier or an [*], and press the [NEXT] key.

[Stn] - Enter the RADC identifier of an [*].

(5) Press [GO] or type an [*] and press [GO] to indicate all zones.

When you press [GO], the system creates a summary display based upon the information you have entered. Any

parameter you omitted is set to [*] indicating all.

Display an RADC Summary.

(1) Select the F7 [SUMMRY] key from the main menu.

(2) Press F3 [STN] key and confirm your selection by pressing [NEXT].

(3) Press [NEXT] again and identify the groups. Use the [*] to indicate all groups. Press [NEXT].

(4) Enter the station identifier or use an * to identify all stations.

(5) End the command by pressing [GO].

The system displays the summary and returns you to the main menu of soft-keys.

E-24