Control a Two: State Device or Ternary Point

TM 5-6350-275-10

NOTE

The cursor will stop only at a controllable point.

(b)

Use the up and down arrow keys to, select the desired controllable point.

NOTE

It may be necessary to use the [SCROLL UP] key to display the desired point.

(c)

Press [GO] to confirm your selection, and press [GO] again to [SELECT].

(d)

Use the left or right arrow keys to select the alternative state(s) for the device and press [GO].

(e)

The message "EXECUTED" is displayed.

NOTE

If you receive the message "CHECKBACK" it indicates that you need to confirm your request. Press [GO] to confirm.

(f) Press F2 [CANCEL] and [GO], or F10 [QUIT] to return to the main menu.

Control a Two: State Device or Ternary Point . This is an alternative to using the cursor. Refer to figure E-4,

Controlling Equipment.

(1) Press the F2 [CNTRL] key from the main menu.

(2) Enter the following:

[Group] and press [NEXTJ

[Stn] and press [NEXT]

[Prefix] and press [NEXT]

[Numeric] and press [NEXT]

[Suffix] and press [GO]

(3) Press [GO] again to select.

(4) Use the left or right arrow keys to select the alternative state(s) for the device and press [GO].

(5) The message "EXECUTED" is displayed.

NOTE

If you receive the message "CHECKBACK" it indicates that you need to confirm your request. Press [GO] to confirm.

(6) Press F2 [CANCEL] and [GO], or F10 [QUIT] to return to the main menu.

E-6. ATTRIBUTES AND ACCESS LEVELS.

a. Restrict Access Into and Out of a Security Zone.

(1)

Refer to figure E-5, Summaries.

E-10