Figure E-4. Controlling Equipment

TM 5-6350-275-10

Figure E-4. Controlling Equipment

(c)

Press [GO] to select and use the left or right arrow key to change the "set to" state. Press [GO].

(d)

When the command has been executed, the message is "EXECUTED".

(e)

Press F2 [CANCEL] and [GO], or F10 [QUIT] to return to the main menu.

b. Control a Two State Device or Ternary Point Using the Cursor.

(1)

Refer to figure E-5, Summaries.

(a)

Press the F7 [SUMMRY] key from the main menu.

(b)

Press the F4 [STATUS] or F7 [ALL] key.

(c)

Press [NEXT] twice.

(d)

Enter the following:

[Group] or [*] and press [NEXT]

[Stn] or [*] and press [GO]

(2)

Refer to figure E-4, Controlling Equipment.

(a)

Press the F2 [CNTRL] key from the main menu.

E-7