Section V. SYSTEM ADMINISTRATOR PROCEDURES

TM 5-6350-275-10

Section V. SYSTEM ADMINISTRATOR PROCEDURES

2-25. SCOPE. This section provides information for the System Administrator at another level of operation. Certain

designated individuals will be authorized to perform system administrator functions. This section provides instructions to:

a. Add, delete, or modify a system operator's profile record.

b. Create, modify, or delete access control records.

c. Create supervisor and zone user records, to include assigning them personal identification numbers (PINs).

d. Back up and restore the system software.

2-26.

RECONFIGURATION .

a. General. The reconfiguration program shows users who are not programmers how to define and review a

configurable element of the system software. You use the reconfiguration program to add, delete, or modify a systems

operator's profile record, and to create, modify, or delete access control records.

b. Help. Help information is provided in the Reconfiguration program by pressing the [HELP] key. It can be used

whenever a form is displayed.

(1) Most forms have a single help page which provides a general description of the form and any other important

information. On these forms, pressing the [HELP] key always causes the same help page to be displayed.

(2) Other forms provide help pages for individual fields which give more detailed information about the field's

function and permitted input.

(3) When you press [HELP], the system overlays the current form with the correct help page. If there is more

than one page available, it also activates the [NEXT PAGE] and [PREV PAGE] keys, which let you move between pages.

Press the [GO] key to return to the original form.

c. Saving Records. When all information has been entered, you can save the record using either [GO] or

[FINISH]. Pressing [GO] returns you to the preliminary page of the current record, so you can create, modify, or delete

another record. The [FINISH] key returns you to the previous menu. The system validates all entries. If invalid data is

found, the program sounds an audible tone, and re-displays the page.

d. Printing and Deleting Records. Any time a form is displayed, its record can be printed or deleted from the disk

using the F1 and F2 function keys.

(1) When the print (F1) option is selected, the system sends all forms associated with the current record to the

printer.

(2) When the delete (F2) option is selected, the system requests confirmation. Press [GO] to confirm, or

[CANCEL] to abort this option. When you press [GO] to confirm you must enter an eight character password to execute

the command.

e. Accessing Reconfiguration. Access reconfiguration by means of the ICIDS SignOn form, Figure 2-16. Enter

reconfiguration as follows:

2-63