DISPLAYING.SUMMARIES

TM 5-6350-275-10

all of the following options. You are requested to choose from these by the prompt Select class and press [NEXT].

[MENU] (OPTIONAL)

[ZONE]

[STN]

(STATUS]

[ANALOG]

[PULSE) (not used)

[ALL]

[CARD]

[PORTAL]

F10

[QUIT]

Use the [MENU] key if you want to select a display from the Summary Display menu. Otherwise select one of the

keys F2-F9 to choose between an RADC summary, a zone summary, a point summary, a portal summary, and a card

holder summary.

(1) The [MENU] optional soft-key accesses the Summary Display Menu. When you press the key, the

system displays the titles of up to 32 types of display and highlights the first option to indicate that it is currently selected.

To select a different option, move the highlight bar over the required entry using either [NEXT] or any cursor control key.

When you have made the selection, press [GO]. The system creates the display and returns you to the Main menu. This

display becomes the first link in a new chain.

(2) The [ZONE] soft-key creates a display which briefly describes the status of each zone. Using the key,

you can define a display which lists either all zones or those which are currently alarm disabled/enabled. If your system

supports Access Control, the key can be used to display zones where access has been restricted in some way or where

the normal access requirements are in force.

Select the key and press [NEXT] to see menu containing three or more of the keys shown below. If your system

supports Access Control, all of the options shown are available. If it does not, only options F1, F2, and F10 appear.

[ALM DI]

[ALM EN]

[ALL]

[NORMAL]

NoENTR]

[NoEXIT]

[NoACCS]

[UNLOCK]

F10

[QUIT]

(a) The [ALM DI] option selects zones whose alarms are inhibited and [ALM EN] those whose alarms are

enabled. Keys F4 - F9 select the various access control parameters which can apply to a zone. [ALL] denotes all zones.

[NORMAL] denotes only zones where access Is controlled in the normal way. [NoENTR] and [NoEXIT] select zones

where only entry and exit are allowed. [NoACCS] indicates any zone where both entry and exit are prohibited.

[UNLOCK] signifies any zone which has all of its portals set to "unlocked" to allow unrestricted access. Your options at

this stage are:

To ignore the menu.

To select key F1 and/or F2.

2-52