Table 2-5. Monitor Cabinet and Status Monitor Module Operating Procedure cont'd

TM 5-6350-264-14&P-11

NAVELEX EE 181-AA-OMI-120/E121 C-7359-60-1

T.O. 31S9-2FSS9-1-11

Table 2-5. Monitor Cabinet and Status Monitor Module

Operating Procedure M-3--Continued

Indication

Operator response

4. SECURE indicator lights (green

a. Momentarily place RESET/ACK switch on associated Status Monitor

flashing and audible signal) device

Module in the ACK position.

sounding.

b. If change to SECURE is not part of a prearranged securing of protected

area, direct security personnel to indicated protected area to ensure

that area is physically secure.

5. AC POWER indicator lights (white)

a. Momentarily place RESET/ACK switch on associated Status Monitor

flashing and audible signal device

Module in the ACK position.

sounding.

b. If lights extinguish, inform designated personnel that ac power to

associated protected area has just been lost (NOTE 2) (NOTE 4).

If lights stay on steady state, ac power has been restored to Control Unit.

NOTE 1

If alarm occurs when SECURE lights (green) are on, a high probability exists that an

intrusion is in progress. If alarm occurs when ACCESS (amber) lights are on, a high

probability exists that personnel are tampering with the system in the protected area or that

personnel in the protected area are in danger. Security personnel responding to the alarm

should be provided with this information if possible.

NOTE 2

Abnormal conditions shall be reported to the following personnel:

,telephone

NOTE 3

At normal operating temperatures [60 F to 100 (15.6 to 37.8 C)], Monitor Cabinet

battery will apply power for at least the following times:

One-zone, 24 hours.

Five-zone, 20 hours.

Twenty-five-zone, 12 hours.

2-10